google-site-verification=6WZdJq5U-IMFhY4DfpugBkP8RlIzsy3JETryxZkxojw
top of page
Writer's pictureBENEDICT GITHAIGA

Fixing a Sinking Office Chair





 Fixing a Sinking Office Chair


Welcome to the Jobel General Hardware blog, where we tackle common DIY repair challenges to help you maintain a comfortable and productive workspace. Today, we're addressing a frustrating issue many office workers face: a sinking office chair. If your chair sinks unexpectedly or fails to stay at the desired height, follow these steps to diagnose and fix the problem.


Understanding the Issue:


A sinking office chair typically indicates a problem with the gas lift cylinder. This cylinder is responsible for adjusting the chair's height and can wear out over time, causing the chair to gradually lower or sink when seated.


Tools You'll Need:


Before starting the repair, gather the following tools:


Replacement gas lift cylinder** (make sure it matches your chair's specifications)

Rubber mallet or hammer**

Gloves

Allen wrench set


Step-by-Step Repair Guide:


1. Assess the Situation:

- Sit in the chair and observe if it sinks slowly or immediately upon sitting.

- Check for any visible leaks or damage to the gas lift cylinder.


2. Prepare for Repair:

- Clear the area around your workspace to avoid any obstacles.

- Wear gloves to protect your hands during the repair process.


3. Remove the Old Gas Lift Cylinder:

- Turn the chair upside down so you have access to the underside.

- Use an Allen wrench to loosen and remove the screws attaching the base of the chair to the gas lift cylinder.

- Carefully detach the cylinder from the chair base and seat mechanism.


4. Install the New Gas Lift Cylinder

- Position the new gas lift cylinder into the chair base and seat mechanism.

- Ensure it aligns properly with the screw holes.

- Use a rubber mallet or hammer to gently tap the cylinder into place if needed.


5. Reassemble the Chair:

- Securely tighten the screws to attach the new gas lift cylinder to the chair base and seat mechanism.

- Double-check all connections to ensure stability and functionality.


6. Test the Chair:

- Flip the chair upright and test the height adjustment by sitting in it.

- Adjust the chair to your preferred height and check if it remains stable without sinking.


Additional Tips:


Safety First: Always follow manufacturer guidelines and wear protective gear when handling tools or heavy chair components.

Consult a Professional: If you're uncomfortable with DIY repairs or encounter difficulties, consider seeking help from a professional technician.


Conclusion:


Fixing a sinking office chair is a manageable task with the right tools and approach. By replacing the gas lift cylinder, you can restore your chair's functionality and comfort, ensuring a more ergonomic workspace.


Stay tuned to Jobel General Hardware for more practical DIY tips and solutions. Have questions or need further assistance? Drop us a comment below, and we'll be happy to assist you.


Happy repairing!


Disclaimer: Ensure your safety and follow proper procedures when handling repairs. If unsure, consult a professional.

1 view0 comments

Comments


bottom of page